Motec M1 Tune User Manual Manuel d'utilisateur télécharger pdf (Page 55)

User Manual

USING M1 TUNE

Printed documents are not controlled Page 54

11.9 LAMBDA WAS

If the fuel table needs to be tuned from data either offline or offsite, the " L" ( Lambda Was)

function can be used.

This function works exactly the same as " Q " does but with user entered lambda values. When "

L " is pressed, a window prompts for the user to enter the recorded lambda value, rather than

using a recorded value.

11.10 VIEWING LIVE PIN VOLTAGE VALUES

At times it is necessary to know the actual voltage that is on a particular pin, whether that is an

input or an output.

Note: If connected to an ECU, all voltage values shown are instantaneously updated in

real time.

1. Select menu Online »Monitor Inputs / Outputs.

►The Monitor Input/Output window displays showing the Digital Input tab, for example:

2. Select the Analogue Inputs tab to display all analogue pin voltages, for example:

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 76 77

Pas de commentaire

Motec M1 Tune User Manual Manuel d'utilisateur Page 55