Motec M1 Tune User Manual Manuel d'utilisateur télécharger pdf (Page 48)

User Manual

USING M1 TUNE

Printed documents are not controlled Page 47

11.3.2 Editing Channel Properties

The channel properties are set in the Channel Properties window. There are two methods of

accessing this window.

Note: These channel properties are global, and any change that is made will reflect

across the entire application.

1. From the Data Properties window, see Accessing Data Properties

, select Edit.

►The Channel Properties window displays.

2. Set the channel properties as required. See Setting Channel Display Limits

1. From the Channels component, right-click on the required channel and select Properties

►The Channels Properties window displays.

2. Select the Edit button.

►The Channel Properties window displays.

3. Set the channel properties as required. See Setting Channel Display Limits

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 76 77

Pas de commentaire

Motec M1 Tune User Manual Manuel d'utilisateur Page 48