Motec ADR Manuel d'utilisateur télécharger pdf (Page 7)

ADR Functionality User Manual Configuration

Device Configuration Buttons

The Load, Save, Send and Close buttons are used to perform the following functions:

Load Load an existing configuration to the ADR Manager from disk.

Save Save the current configuration in the ADR Manager. This does not apply the configuration to the

ADR.

Send Apply the configuration to the ADR. The ADR configuration remains unchanged until another

configuration is sent.

Close Closes the Device Configuration window.

General Tab

See Figure 3, the function of the parameters on the General tab is as follows.

Identity/Name Optional name for the ADR.

Mounting Orientation The orientation of the installed ADR must be specified. This allows the

accelerometer readings to be correctly aligned to the vehicle. See the Orientation

section on page 13 for more detail.

Supercapacitor

Recharge/Recharge Rate

The rate determines how fast the super capacitor is charged. The maximum rate

(100%) is recommended for most applications.

The higher the charge rate, the quicker the supercapacitor reaches full charge.

See the Power section on page 18 for more detail.

MoTeC — Published: 11 February 2014 Page 6

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Pas de commentaire

Motec ADR Manuel d'utilisateur Page 7