Motec PWC Plug-In ECU Manuel d'utilisateur télécharger pdf (Page 36)

MoTeC Hydrospace S4 Installation 29

Launch Mode Button

The existing left handlebar includes an unused blue push button which

MoTeC has designated for Launch Mode. Full throttle can be applied prior to

a race start to build up turbo boost, whilst limiting RPM to 2250. When the

blue button is released, full power is delivered very quickly resulting in rapid

acceleration.

The original blue button is wired through a temperature switch. This switch is

mounted in the exhaust manifold prior to the turbo and will trip at 70 °C,which

would disable the Launch Mode function. This is impractical for race

conditions.

To ensure that Launch Mode is available at all times, install a bypass plug to

short circuit the two pins of the temperature switch connector (same

connector as a Bosch injector).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 90 91

Pas de commentaire

Motec PWC Plug-In ECU Manuel d'utilisateur Page 36